| Name of the file: Ostranauts Cheat Codes - Author: DAV |
| Cheat Codes: ------------ Submitted by: David K. How to Start Your First Reactor: -------------------------------- Written by SteelWolf -=What You Need=- A reactor needs these three components to work: * A D20 Canister. * An HE-3 Canister (Liquid Helium Canister). * A battery with at least a little bit of charge hooked up to the input of the reactor. -=Starting the Reactor=- After you've made sure everything was plugged in properly, its time to start the reactor. Its not too overly complex, so it should be no problem. * First switch PWR Bus To Batt at the middle left. * After that turn Core Purge to RGH at the bottom right. * Then wait for the LAS Cap light to stop flashing at the right hand side. * Once it has stopped flashing, flick the LAS Align switch to on, also on the right hand side. * After that switch Pell Feed on, right beside the LAS Align switch. * Next turn on the coolant (flick the CRYO switch to on) right above Ignition. * Next press the Fuel REG button on the bottom right, right next to Core Purge. * After that press the FWD and Rear buttons, next to the button you just pressed. * Next flick the MHD switch to the on position, towards the upper left of the CRYO switch. * When the Capacitor Charge reaches ready (top right), Flick the Ignition switch to on (below the CRYO switch). -=Congratulations!=- You just started your first reactor! If you want to refill the battery you used to kick this thing into action, just flip the PWR BUS switch to CHRG. |